199 echo    <arbitrary text>
100 message 
197 sleep   [<seconds>=1]
198 clock   [ [ YYYY-MM-DD ] [ HH:MM[:SS] ] ]

308 var/print <expression>
301 var/set   <var> [ = <expression> ]
300 var/shift 

220 script/list [ "<dirpath>" ]
240 script/execute "<filepath>"
243 script/exit
241 script/label <expression>
242 script/goto <expression>
246 script/while <expression>: <command> [; <commands>]
247 script/until <expression>: <command> [; <commands>]
244 script/if <expression>: <command> [; <commands>]
245 script/for <expression>: <command> [; <commands>]
230 script/mount

231 flash/id
232 flash/status
233 flash/read  <block>
234 flash/write <block> [ erase(default) | noerase ]
238 flash/dump  [<offset>]
235 flash/erase <sector>
236 flash/message <block>

200 memory/peek <address>
201 memory/poke <address> <value>

255 altera/send <command> [<nread>]
255 altera/register <address> [<value>]
251 altera/reset
252 altera/file "<filename>"
253 altera/flashbuf
254 altera/usbblock
250 altera/status
256 altera/sync "<word>"
259 altera/inject <command>
257 altera/stream <flags> [<syncword>=0x8000=0x8001(/off)]
	/off             0
	/usb             1
	/spi             2
	/sdcard    0x10002
	/ethernet  0x20002
	/hk         0x0010
	/fifos      0x00e0
	/f1         0x0020
	/f2         0x0040
	/f3         0x0080
	/events     0x0020
	/samples    0x0040
	/direna     0x0060
258 altera/dmastatus
258 altera/idle [ <word> [<mic>] ]

255 altera/fifos/reset [<value>]		0x8007
255 altera/fifos/status [<value>]		0x8005
255 altera/fifos/errors [<value>]		0x8006
255 altera/fifos/control [<value>]		0x800b
255 altera/fifos/set [<value>]	 		0x800a
255 altera/fifos/clear [<value>]		0x8009
255 altera/fifos/idleword [<value>]		0x8002
255 altera/fifos/clockl [<value>]		0x800c
255 altera/fifos/clockh [<value>]		0x800f
255 altera/fifos/hksize [<value>]		0x8018
255 altera/fifos/hkstat [<value>]		0x8010
255 altera/fifos/f1stat [<value>]		0x8011
255 altera/fifos/f2sta [<value>]t		0x8012
255 altera/fifos/f3stat [<value>]		0x8013

301 direna/reset <flags> [<expression>]
	/fifos    0x00f00000
	/clock    0x80080000
	/run            0xff
	/spi      0x01000000
	/all      0xffffffff
	/frontend 0x11110000

302 direna/initialize
303 direna/enable <flags>
	/off             0
	/usb             1
	/spi             2
	/sdcard    0x10002
	/ethernet  0x20002
	/hk         0x0010
	/fifos      0x00e0
	/f1         0x0020
	/f2         0x0040
	/f3         0x0080
	/events     0x0020
	/samples    0x0040
	/direna     0x0060
304 direna/register <address> <value>
309 direna/nsamples <samples>
305 direna/fifos <flags> 
	/disable        0x00004001
	/enable         0x00004002
	/clock          0x00080000
	/housekeeping   0x00100000
	/events         0x00200000
	/samples        0x00400000
	/readback       0x06000000
	/off            0x00084003
	/on             0x06784003
300 direna/status
310 direna/pulse/send <channel>
311 direna/pulse/set <index> <timeindex> <acoeff> <bcoeff>          
306 direna/adcmask <mask>
308 direna/threshold <channel> <threshold>
307 direna/triggermask <mask>

261 usb/discard
262 usb/bcopy
263 usb/stream/status
264 usb/stream/sdcard <sector> <count>
265 usb/stream/flash <sector> <count>
266 usb/stream/memory <address> <bytes>
269 usb/stream/stop

260 sdcard/status
261 sdcard/init
263 sdcard/read <sector>
264 sdcard/write <sector>
266 sdcard/cid
265 sdcard/csd
267 sdcard/copy_from_flash <sector> [<flashsector>=0 [<count>=0x800]]
237 sdcard/copy_to_flash <sector> [<flashsector>=0 [<count>=0x800]]
262 sdcard/erase <first> <last>
268 sdcard/findfree [ <first>=0 [ <last>=<size> [ <test>=0xffff0000 ]]]

270 ethernet/initialize [ [full_]duplex | half_duplex | LED ]
271 ethernet/send
272 ethernet/rxen [ enable(default) | disable ]
273 ethernet/source/mac <hh:hh:hh:hh:hh:hh>
273 ethernet/source/ip <iii.iii.iii.iii>
273 ethernet/source/port <port>
274 ethernet/destination/mac <hh:hh:hh:hh:hh:hh>
274 ethernet/destination/ip <iii.iii.iii.iii>
274 ethernet/destination/port <port>

901 mainloop  "unknown command"

850 altera  "nSTATUS does not go low"
851 altera  "nSTATUS does not go high"
852 altera  "nSTATUS went low during config"
950 altera  "no such file"
850 altera  "CONF_DONE did not go high"
951 altera  "no usb data block"
855 altera  "SSP busy"
855 altera  "SSP timeout"
960 altera  "SDcard not ready"

855 direna  "SSP busy"

709 expression  ") expected"
701 expression  "number expected"
709 expression  "!= or == expected"
709 expression  ": expected"

830 flash  "SPI error"
831 flash  "flash busy"
832 flash  "flash erase error"
833 flash  "flash read error"
834 flash  "flash read error"
835 flash  "flash write buffer error"
836 flash  "flash write page error"
837 flash  "flash busy after first sector write"
838 flash  "flash write buffer error"
839 flash  "flash write page error"
930 flash  "flash sector number out of range"

960 microsd  "SD card not ready"
968 microsd  "SD card timeout"
930 microsd  "sdcard sector number out of range"
962 microsd  "sdcard erase command"
963 microsd  "sdcard read"
962 microsd  "read cid"
962 microsd  "read csd"
964 microsd  "sdcard write"
967 microsd  "sdcard write"
937 microsd  "sdcard read"
963 microsd  "sdcard read"

999 parser  "some flag keyword expected"
902 parser  "integer number expected"
905 parser  "value_error"
903 parser  "quoted string expected"
904 parser  "string too long"
911 parser  "hex byte expected"
900 parser  "command keyword expected"
905 parser  "backspace found, command ignored"
901 parser  "unknown command"

799 script  "no flash filesystem found"
741 script  "label number too big"
709 script  ": expected"

860 stream  "No USB OUT buffer"
860 stream  "stream busy"
860 stream  "USB IN busy"
963 stream  "sdcard read"

670 udp  "ethernet not ready"
910 udp  "mac expected"
910 udp  "ip address (.) expected"

708 variables  "no local variables"	
702 variables  "variable name expected"